Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 153

Setting Up and Configuring the WRVS4400N Wireless-N Router
Viewing Status
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 153
5
Viewing WAN/Gateway Status
The Status > Gateway window displays the WAN / Gateway status of the router,
providing some basic information on the router (for example, firmware version,
time) and WAN port MAC/IP address and connection status.
To view the WAN/Gateway status of the router, follow these steps:
STEP1 Click Status > WAN.
STEP 2 View the WAN / Gateway status of the router.
• Information
- Firmware Version—Displays the current firmware version.
- MAC Address—Displays the WAN port MAC address, as seen by your
ISP.
- Current Time—Displays the time on this router according to your
settings on the Setup >Time window.