Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 213

Cisco ProtectLink Web Service
How to Purchase, Register, or Activate the Service
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 213
E
NOTE To have your e-mail checked, you will need to provide the domain name and
IP address of your e-mail server. If you do not know this information, contact
your ISP.
I have my Activation Code (AC) and want to activate ProtectLink Web. If you
have registered, click this link. A wizard begins. Follow the on-screen instructions.
When the wizard is complete, the Web Protection and License menus will appear.
NOTE If you replace the router with a new router that supports this service, click I
have my Activation Code (AC) and want to activate ProtectLink Web. Then
use your current activation code to transfer your license for the ProtectLink
service to the new router.
After you activate ProtectLink, the following window appears when you click
ProtectLink > ProtectLink Purchase from the menu.
ProtectLink (Active)