Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router User Manual

Setting Up and Configuring the WRVS4400N Wireless-N Router
Navigating the Utility
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 35
5
L2 Switch
This window allows you to configure layer 2 switching features on the 4 port
Ethernet switch (LAN ports only) through the following windows:
• Create VLAN—Creates a Virtual Local Area Network (VLAN) assignment.
• VLAN & Port Assignment—Configures VLAN and port settings.
• RADIUS—Configures Remote Authorization Dial-In User Service (RADIUS)
settings.
• Port Setting—Configures port speeds and duplex operation.
• Statistics—Displays statistics for both received and transmitted packets.
• Port Mirroring—Configures port mirroring.
• RSTP—Configures RSTP (Rapid Spanning Tree Protocol) settings.
Status
This window allows you to monitor the current status of the router through the
following windows:
• Gateway—Provides basic information like firmware version and status
information on the WAN port.
• Local Network—Provides status information about the local network (four
Ethernet ports).
• Wireless LAN—Provides status information on Wireless LAN.
• System Performance—Provides traffic statistics on LAN and Wireless
LAN ports.

Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router Specifications

General

Brand	Cisco
Model	WRVS4400N - Small Business Wireless-N Gigabit Security Router
Category	Wireless Router
Language	English