Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 38

Setting Up and Configuring the WRVS4400N Wireless-N Router
Setting Up Your Wireless-N Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 38
5
Displaying A Read-Only Summary of the Basic Router
Information
The Setup > Summary window displays read-only information about the router.
To view the Setup > Summary window, follow these steps:
STEP1 Click Setup > Summary.
STEP 2 Click Refresh to display the latest router settings.
The Summary window displays the following information:
• System Information
- Firmware version—Displays the router's current software version.
- CPU—Displays the router's CPU type.
- System up time—Displays the length of time that has elapsed since the
router was last reset.
- DRAM—Displays the amount of DRAM installed in the router.
- Flash—Displays the amount of flash memory installed in the router.