Cisco WRVS4400N - Small Business Wireless-N Gigabit Security Router - Page 56

Setting Up and Configuring the WRVS4400N Wireless-N Router
Setting Up Your Wireless-N Router
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide 56
5
To configure DMZ Hosting, follow these steps:
STEP1 Click Setup > DMZ
STEP 2 Fill in the DMZ Hosting settings:
• DMZ Hosting—To allow one local personal computer to be exposed to the
Internet for use of a special-purpose service such as Internet gaming and
video-conferencing, select Enable.
- To disable the DMZ feature, select Disable.
• DMZ Host IP Address—Enter (complete) the IP address of the computer to
be exposed to the Internet, for DMZ hosting.
STEP 3 Click Save.