34-66
Catalyst 3750 Switch Software Configuration Guide
78-16180-02
Chapter 34 Configuring IP Unicast Routing
Configuring Protocol-Independent Features
Step 11
match route-type {local | internal | external [type-1 |
type-2]}
Match the specified route-type:
• local—Locally generated BGP routes.
• internal—OSPF intra-area and interarea routes or
EIGRP internal routes.
• external—OSPF external routes (Type 1 or Type 2)
or EIGRP external routes.
Step 12
set dampening halflife reuse suppress
max-suppress-time
Set BGP route dampening factors.
Step 13
set local-preference value Assign a value to a local BGP path.
Step 14
set origin {igp | egp as | incomplete} Set the BGP origin code.
Step 15
set as-path {tag | prepend as-path-string} Modify the BGP autonomous system path.
Step 16
set level {level-1 | level-2 | level-1-2 | stub-area |
backbone}
Set the level for routes that are advertised into the
specified area of the routing domain. The stub-area and
backbone are OSPF NSSA and backbone areas.
Step 17
set metric metric value Set the metric value to give the redistributed routes (for
any protocol except IGRP or EIGRP). The metric value is
an integer from -294967295 to 294967295.
Step 18
set metric bandwidth delay reliability loading mtu Set the metric value to give the redistributed routes (for
IGRP or EIGRP only):
• bandwidth—Metric value or IGRP bandwidth of the
route in kilobits per second in the range 0 to
4294967295
• delay—Route delay in tens of microseconds in the
range 0 to 4294967295.
• reliability—Likelihood of successful packet
transmission expressed as a number between 0 and
255, where 255 means 100 percent reliability and 0
means no reliability.
• loading— Effective bandwidth of the route expressed
as a number from 0 to 255 (255 is 100 percent
loading).
• mtu—Minimum maximum transmission unit (MTU)
size of the route in bytes in the range 0 to
4294967295.
Step 19
set metric-type {type-1 | type-2} Set the OSPF external metric type for redistributed routes.
Step 20
set metric-type internal Set the multi-exit discriminator (MED) value on prefixes
advertised to external BGP neighbor to match the IGP
metric of the next hop.
Step 21
set weight Set the BGP weight for the routing table. The value can
be from 1 to 65535.
Step 22
end Return to privileged EXEC mode.
Command Purpose
To Next Page
Loading...
Need help?
General