Citizen CL-S6621 - Page 67

Operation Panel
2-53 CL-S6621
7. When the Service Mode Menu message is printed as shown below, press the [PAUSE] key
to enter its submenus.
* The following submenus will be printed successively as you press the [PAUSE] key
repeatedly.
* When you press the [PAUSE] key, check is done and the check result will be printed.
For performing each item, see “
(3-3) Factory/Service Mode menu table - (b) Service
Mode menu table” and setting example “How to perform the check in the Service Mode
menu” on page 2-
58.
Do you want to change “Service Mode Menu” items?
Yes=(PAUSE) No=(STOP) Exit=(MODE)
Head Check Exec
Yes=(PAUSE) No=(STOP) Exit=(MODE)
ROM Check Exec
Yes=(PAUSE) No=(STOP) Exit=(MODE)
RAM Check Exec
Yes=(PAUSE) No=(STOP) Exit=(MODE)
Print Counter Exec
Yes=(PAUSE) No=(STOP) Exit=(MODE)
Service Counter Exec
Yes=(PAUSE) No=(STOP) Exit=(MODE)
Cutter Counter Exec
Yes=(PAUSE) No=(STOP) Exit=(MODE)
Do you want to change “Page Setup Menu” items?
Yes=(PAUSE) No=(STOP) Exit=(MODE)
8. To exit the Factory/Service mode, press the [MODE] key.