Operation Panel
CL-S6621 2-58
1How to perform the check in the Service Mode menu
For example, the following shows how to perform the head check.
1. Perform steps 1-7 on pages 2-
51 to 2-53 to enter the Service Mode menu. See “(3-2) How
to enter the Factory/Service Mode”.
2. Press the [PAUSE] key until “Head Check” submenu is printed.
Do you want to change “Service Mode Menu” items?
Yes=(PAUSE) No=(STOP) Exit=(MODE)
Head Check Exec
Yes=(PAUSE) No=(STOP) Exit=(MODE)
3. Press the [PAUSE] key to check for head abnormality.
The number of faulty thermal elements is printed.
Example: Bad head element: 0 dot(s)
After printing the check result, the next submenu is automatically printed.
If you press the [STOP] key, nothing is printed.
To Next Page
Loading...
