Citizen CT-E651 - Line Feed Span Commands; Esc 2

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 107 -
2.2.5 Line Feed Span Commands
ESC 2
[Function] Specifying 1/6-inch line feed rate
[Code] <1B>H<32>H
[Outline] [The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/CT-P29x series
The line feed rate per line is specified by 1/6 inch.
CT-S2000/CT-S4000/CT-S801/CT-S851/CT-S601/CT-S651/CT-S301II/CT-D150/CT-E351
The line feed rate per line is specified by MSW5-2 setting.
[Caution] [The specification which is common to the model]
• Line feed rate can be specified respectively for both STANDARD MODE and PAGE MODE.
[Default] [The specification which depend on the model]
CT-S280/CT-S281/CT-S300/CT-S310/CT-P29x series
Approx. 4.23mm (1/360 inches)
CT-S2000/CT-S4000/ CT-S801(II)/CT-S851(II)/CT-S601(II)/
CT-S65
1(II)/CT-S301II/CT-S251/CT-D150/CT-E351
(1) MSW 5-2 OFF:
Approx. 4.23mm
(2) MSW 5-2 ON:
Approx. 3.75 mm