- 12 -
2.1.2 CT-S281
Print Control Commands
・
・
FF
(1)Printing in PAGE MODE and returning to STANDARD
MODE (at the selection of PAGE MODE)
(2)Printing of Black mark and paper feeding to the top of the print
position (with Black mark/Label paper selected)
P 60
Printing data in PAGE MODE
Printing and feeding paper in minimum pitch
・
Printing and feeding the paper by “n” lines
・
Print Character Commands
Canceling print data in PAGE MODE
Setting the right spacing of the character
・
Collectively specifying the printing mode
・
Specifying/Canceling download character set
・
Defining the download characters
・
Specifying/canceling underline
・
Deleting download characters
・
Specifying/canceling emphasis printing
・
Specifying/canceling double strike printing
・
Selection of character fonts
・
Selecting the international character set
・
Specifying/canceling 90°-right-turned characters
Selecting the character code table
・
Specifying/canceling the inverted characters
Specifies/cancels printing in red (black-based paper)
・
Specifies/cancels printing in red (black-based paper)
Specifying the character size
・
Specifying/canceling the black/white inverted printing
・
Specifying/canceling the smoothing
・
Print Position Commands
・
Specifying the absolute positions
・
Setting horizontal tab position
・
Selecting the character printing direction in PAGE MODE
Defining the print area in PAGE MODE
Specifying the relative position
・
GS $
Specifying the absolute vertical position of characters in PAGE
MODE
P ○ 102
Setting the print area width
・
GS
\
Specifying the relative vertical position of a character in PAGE
MODE
S・P
○ 106
To Next Page
Loading...
