- 28 -
2.1.7 CT-S4000
Print Control Commands
・
・
FF
(1)Printing in PAGE MODE and returning to STANDARD
MODE (at the selection of PAGE MODE)
(2)Printing of Black mark/Label paper and feeding paper to the
top of the print position (with Black mark/Label paper
P 64
Printing data in PAGE MODE
Printing and feeding paper in minimum pitch
・
Printing and feeding the paper by “n” lines
・
Print Character Commands
Canceling print data in PAGE MODE
Setting the right spacing of the character
・
Collectively specifying the printing mode
・
Specifying/Canceling download character set
・
Defining the download characters
・
Specifying/canceling underline
・
Deleting download characters
・
Specifying/canceling emphasis printing
・
Specifying/canceling double strike printing
・
Selection of character fonts
・
Selecting the international character set
・
Specifying/canceling 90°-right-turned characters
Selecting the character code table
・
Specifying/canceling the inverted characters
Specifies/cancels printing in red (black-based paper)
・
Specifies/cancels printing in red (black-based paper)
Specifying the character size
・
Specifying/canceling the black/white inverted printing
・
Specifying/canceling the smoothing
・
Print Position Commands
・
Specifying the absolute positions
・
Setting horizontal tab position
・
Selecting the character printing direction in PAGE MODE
Defining the print area in PAGE MODE
Specifying the relative position
・
GS $
Specifying the absolute vertical position of characters in PAGE
MODE
P ○ 102
Setting the print area width
・
GS
\
Specifying the relative vertical position of a character in PAGE
MODE
S・P
○ 106
To Next Page
Loading...
