Citizen CT-E651 - GS B N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 92 -
GS B n
[Function] Specifying/canceling the black/white inverted printing
[Code] <1D>H<42>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• This command specifies or cancels the black/white inverted printing.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
Function
0
The black/white inverted printing is canceled.
1
The black/white inverted printing is specified.
[Caution] [The specification which is common to the model]
• The black/white inversion works on internal and downloaded characters.
• The black/white inversion works also on the right spacing of characters defined by ESC SP.
• This command does not affect the bit image, downloaded bit image, bar code, HRI characters, or the skip
area specified by HT, ESC $, or ESC \.
• This command does not affect the space between lines.
• Black/white inversion specification takes precedence over underline specification. Underline printing specified
is, therefore, nullified if black/white inversion is specified; the underline setting, however, remains unchanged.
[Default] n=0