Citizen CT-E651 - Msw10

- 489 -
4.2.10 MSW10
●MSW10-1: Print density
[Outline] Selects the print density.
Setting Value
Print Density
70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
●MSW10-2: Print speed
[Outline] Selects the print speed.
Setting Value
Print Speed
Level1, Level2, Level3, Level4, Level5, Level6,
Level7, Level8, Level9
●MSW10-3: ACK output timing
[Outline] Selects the ACK signal output timing in parallel interface.
Setting Value
ACK Timing
Before Busy, Same Period, After Busy
●MSW10-4: user NV memory capacity (CT-S2000/4000 unique)
[Outline] Selects the user NV memory capacity.
Setting Value
NV User
1Kbytes,64Kbytes,128Kbytes,192Kbytes
●MSW10-4: Emulation Type
(CT-S310II/CT-S801(II)/CT-S851(II)/CT-S251/CT-D150/CT-E351/CT-D151/CT-E651 unique)
[Outline] Selects the emulation of old dot matrix printers.
Setting Value
Emulation Type
ESC/POS, CBM1, CBM2
●MSW10-5: NV graphics memory capacity (CT-S2000/CT-S4000 unique)
[Outline] Selects the NV graphics memory capacity.
Setting Value
NV Graphic
0bytes, 64Kbytes, 128Kbytes, 192Kbytes,
256Kbytes, 320Kbytes, 384Kbytes