Citizen CT-E651 - GS C

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 202 -
GS c
[Function] Print the counter
[Code] <1D>H<63>H
[Outline] [The specification which is common to the model]
• This command prints the serial number counter data.
• After setting the current counter value in the print buffer as the print data (character string), it increments or
decrements the counter according to the set count mode.
[Caution] [The specification which is common to the model]
• The format used in setting the value to the print buffer depends on the GS C0 command.
• The count mode is set by the GS C1 or GS C; command. When execution of “GS c” command results in
excess of the last value of counter range, the countier returns to the first value of the counter range.
[See Also] GS C 0, GS C 1, GS C 2, GS C ；
[Sample Program]
[Print Results]
See the Sample Program and Print Results for the GS C0 command.
See the Sample Program and Print Results for the GS C1 command.