Support
model
- 145 -
• Paper Sensor status (n=1, 49)
0, 1
Paper found by Paper Near-end Sensor
Paper not found by Paper Near-end Sensor
2, 3
Paper found by Paper-end Sensor
Paper not found by Paper-end Sensor
• Drawer kick-out connector status (n=2, 50)
0
Status of pin 3 of drawer kick connector = “L”
Status of pin 3 of drawer kick connector = “H”
[See Also] Appendix 5.3 “Identification of Send Status”
DLE EOT, GS a