Citizen CT-E651 - Page 188

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 187 -
When UTF-8 is selected (FS C n and n=8）
• This command is ignored.
• External character defined before choosing UTF-8 is not printed on UTF-8 mode.
[The specification which is common to the model]
CT-S801(II)/CT-S851(II)/CT-S601(II)/CT-S651(II)/ CT-D150/CT-E351/CT-D151/CT-E651
following MSW9-4 setting.
MSW9-4(japan): Operation of Japanese Kanji specification.
MSW9-4(Chinese, Korea, Taiwan): Operation of Multilingual specification(Hangul, Chinese).
[Sample Program]
LPRINT CHR$(&H1C);"&"; DATA &H00, &H00, &H00, &H00, &H00, &H00
GOSUB SETCHR DATA &H00, &H00, &H60, &H00, &H00, &HF0
LPRINT CHR$(&H77); CHR$(&H21); DATA &H00, &H01, &HF8, &H00, &H03, &HFC
LPRINT CHR$(&HA); DATA &H00, &H07, &HFE, &H00, &H0F, &HFF
LPRINT CHR$(&H1C);"."; DATA &H00, &H00, &HF0, &H00, &H00, &HF0
END DATA &H00, &H00, &HF0, &H00, &H00, &HF0
DATA &H00, &H00, &HF0, &H00, &H00, &HF0
SETCHR: DATA &H00, &H00, &HF0, &H00, &H00, &HF0
LPRINT CHR$(&H1C);"2"; DATA &H00, &H01, &HF0, &H1F, &HFF, &HF0
LPRINT CHR$(&H77); CHR$(&H21); DATA &H1F, &HFF, &HF0, &H1F, &HFF, &HE0
FOR I=1 TO 72 DATA &H1F, &HFF, &HC0, &H00, &H00, &H00
READ D DATA &H00, &H00,&H00, &H00, &H00, &H00
LPRINT CHR$(D);
NEXT I
RETURN
[Print Results]
Registered character