Citizen CT-E651 - Page 469

- 468 -
●MSW2-4: Full Columns print
[Outline] Select the processing if print data closes to the end of line or the right of print width.
OFF(0)
ON(1)
Full Col print
Line Feed
Wait Data
ON (1) OPERATION:
If printer receives data/command exceeding the full column, printer further waits for print data. If data
exceeding the full column is a command, printer operates following the command.
OFF (0) OPERATION:
If printer receives data/command exceeding the full column, it automatically prints data in buffer followed by
a line-feed.
<Example>
If the first data after exceeding the full column is a control code such as<ESC !>;
If OFF (0) is set, print data within buffer and put a line feed, or
If ON (1) is set, print no data within buffer and further wait for print data.
●MSW2-5: Cover close return
[Outline] Select the operating taken after printer cover is opened during printing, paper is refilled with no-paper (PE) is
detected, then cover is closed to restart printing.
OFF(0)
ON(1)
Resume aft PE
Next
Top
ON (1) OPERATION:
Restart printing from the heading of remaining data.
During printing image, bar code, vertically-doubled character or page mode, if cover open or PE is detected,
then after return, restart printing from heading of the remaining data.
OFF (0) OPERATION:
Print data continued from the previous printing. During printing, if cover open or PE is detected, then after
return, restart printing data immediately after an error data.