Citizen CT-E651 - Page 480

- 479 -
●MSW5-6： Auto Back Feed (CT-S281 unique)
[Outline] Selects the behavior of GS+FF (print and black mark/label ejection) command
OFF(0)
ON(1)
Auto Back Feed
After Cut
Before Print
ON (1) OPERATION: After the cut, paper stay there and when printer receives next print data, the back
feeding paper to top of form is done.
OFF (0) OPERATION: Back feeding to top of form is done immediately after the cut.
●MSW5-7: Not defined [Fixed to OFF (0)]
●MSW5-8: FAULT Output
[Outline] Selects the condition of FAULT output
OFF(0)
ON(1)
FAULT Output
PE, PNE, Error
PE, Error
ON (1) OPERATION
At PE or Error, FAULT is output.
OFF (0) OPERATION:
At PE or PNE or Error, FAULT is output.