5-24 T-Series Traffic Director Installation, Configuration and Administration Guide
Chapter 5 Administration
before sending them to the NSWL client, and the client can filter the entries before
storing them. You can log HTTP and HTTPS requests for all application blades on
one NSWL client system.
• Advanced Configurations. You can configure network time protocol to synchronize
a T1000’s local clock with the other servers on the network. If you enable path
maximum transmission unit (PMTU) discovery, the T1000 can use it to determine
the maximum transmission unit of any channel. For more efficient data transfer, you
can configure TCP window scaling and selective acknowledgment. You can clear
any basic or extended configuration on your T1000. You can view statistics
associated with HTTP request and response sizes. For applying a specific HTTP and
TCP settings to vservers and services, you can configure HTTP and TCP profiles.
To Next Page
Loading...
Need help?
General
