T-Series Traffic Director Installation, Configuration and Administration Guide 3-1
3. Basic Load Balancing Configuration
3
Basic T1000/Unison Load-Balancing
Configuration
The procedures in this chapter describe how to configure the data plane of the T1000 Traffic
Director to distribute and process subscriber traffic in a Bytemobile Unison deployment.
This chapter has the following sections:
• Physical Integration of T1000 with Unison
• Managing Configurations
• Assigning VLANs, IP Addresses, and Ports
• Configuring T1000 Data Plane for Layer-2 and Layer-3
• Configuring T1000 Load Balancing
• Configuring Health Checks and Redundancy
• Configuring Source NAT (SNAT)
• Configuring Security
• Testing with Network Diagnostic and Shell Tools
To Next Page
Loading...
Need help?
General
