26
When Mobile Lite makes a second low battery report to the CMS, the GPS
function is turned off and GeoFence function will also be turned off.
Circle Operational Area
Select “Circle Range” to program a circular GeoFence area. Up to 3 circle
operational areas can be set up.
Latitude: Enter the location latitude of the center of the operational area (-90
to 90).
Longitude: Enter the location longitude of the center of the operational area
(-180 to 180).
Both Latitude and Longitude accept coordinates of up to 6 decimal points. Due
to the mechanics of GPS positioning, the 6
th
decimal point may deviate slightly
from the entered value. However, the actual position is affected very slightly.
Radius: Enter the radius of the operational area with respect to the center of
the operational area (200 to 10,000 meters).
Click on “Write” to submit the settings.
To identify the latitude and longitude of a particular location, follow the steps
below to identify a coordinate using Google Map:
Step 1: Open internet browser and access Google Map.
Step 3: Right-Click on a location and select “What’s here?” as shown:
To Next Page
Loading...
