Climax Mobile Pro - Report Sequence

46
with the communication time reset.
<
<
N
N
O
O
T
T
E
E
>
>
 If you wish to enable a designed shortcut function, please press the DTMF
key for at least 1 second.
 The function of pressing sensor button to end call is now programmable
via PC Programming Tool or SMS command. Default is disabled.
 At 20 and 10 seconds before the communication time expires, Mobile Lite
will emit 1 beep via the telephone handset to alert the user.
 If the call recipient needs more talk time, he can press any key except for
(9) to reset the communication time to its preset duration.
 If no DTMF command is pressed during the speech period, the call will
automatically hang up and be recorded as an unsuccessful report. Each
phone number will be retried up to a maximum of 5 times accordingly.
6.5.4. Report Sequence
The Reporting Group determines the sequence of reporting.
One Report Index can only be assigned to one Group.
Reporting within a Group:
If there are multiple Report Indexes programmed within a Group:
 Mobile Lite will report according to the numeric order (e.g. 1 > 2 > 3, etc.)
of the Report Index in a Group. Report will stop when one report is
successful and Mobile Lite will regard reporting to this Group successful.
For example, if Report Index 1 and 4 is assigned to Group 1, Mobile Lite
will stop reporting if reporting to Index 1 is successful. If reporting to Index
1 failed, Mobile Lite will carry on reporting to Index 4.
 If all reporting in a group failed, Mobile Lite will retry reporting to all Report
Indexes within this group for 5 times (or until one of the reports is
successful). If all the retry fails, Mobile Lite will regard reporting to this
Group unsuccessful.
From the example above, suppose all report failed, the report sequence:
1 > 4 > 1 > 4 > 1 > 4 > 1 > 4 > 1 > 4
 There is one exception to the rules above, please refer to 6.5.5. Special
Reporting Case.
Reporting Cycle
 If multiple groups are assigned to the same event type (emergency or
status), Mobile Lite will report according the group numeric order from the
first programmed Group to the last programmed group. This report