Climax Mobile Pro - Rebooting and Factory Resetting Mobile Lite

48
Group 1 > Group 3 > Stops reporting
6.5.5. Special Reporting Case: IP + Speech Report
If the user programs one IP and one Speech report within the same group:
 Mobile Lite will always report to the Speech report number regardless of
whether IP Report is successful or not.
 Successful report:
Mobile Lite will consider the report successful only if Speech report is
successful.
If Speech Report fails, the Mobile Lite will retry report,
6.6. Sleep Mode
Mobile Lite can enter Sleep Mode to conserve power.
While under normal operation mode, press the Active Button for 5 seconds to
enter / exit Sleep Mode.
 When Mobile Lite enters Sleep Mode, all functions, including the LED
indicators, will be disabled during this time. Mobile Lite will emit a voice
prompt “Power Off” as an indication of it entering Sleep Mode.
 The user can only program Mobile Lite for the duration using PC
Programming Tool. As the cellular module is also disabled, SMS
commands will not be able to program Mobile Lite for the duration.
 Mobile Lite will only start to function when it exits Sleep Mode (pressing
the Active Button for 5 seconds). Mobile Lite will emit a voice prompt
“Power On” as an indication of it exiting Sleep Mode.
<
<
N
N
O
O
T
T
E
E
>
>
 After exiting Sleep Mode, Mobile Lite will connect to the mobile network. It
will emit a “GSM Signal” voice prompt and a number voice prompt to
indicate its signal strength.
6.7. Rebooting and Factory Resetting Mobile Lite
Rebooting Mobile Lite
Step 1. Press Mobile Lite’s active button for 15 seconds in any mode to enter
reset mode. All LED will turn on for 1 second.
Step 2. Press the active button once within 10 minutes. After 3-5 seconds, all
LED will turn on briefly to indicate rebooting successful.