Climax Mobile Pro - 8 Appendix; Sms Remote Programming Commands Table

52
8. Appendix
8.1. SMS Remote Programming Commands Table
Item
Command
Example & Usage
Default
Make Unit
Scream
SCREAM
SCREAM:PROG,1111,60
To set the length of Mobile Lite’s beeping period (5-60 seconds) to help the
search for Mobile Lite when the device is lost
This command will also request for location information.
--
Locating via
SMS
LOC
LOC:PROG,1111,1
To locate Mobile Lite user via SMS
Parameter: 0 = No reply to sender’s mobile number
1 = Reply location to sender’s mobile number ,
--
Cellular
Module Reset
RSTG
RSTG:PROG,1111
To reset Cellular Module
--
GPRS APN,
username &
password
APN
APN:PROG,1111,internet,,
To set GPRS APN, username and password (31 characters max. for APN, 31
characters max. for username, 31 characters max. for password)
APN:
Internet
Usernam
e and
passwor
d: empty
Report
settings
RPT
RPT:PROG,1111,1,0933111222,1,0,0,1
To configure report settings (index number, report destination, group, type,
miscellaneous and event filter)
Report Index: 1-5
Report destination: Depending on the reporting format
Group: 1-5
Type: 0 = Speech, 10 = CID_IP, 11 = CID_SIA_IP, 12 = SIA_IP, 13 =
SIA_CID_UDP, 14 = SIA_UDP, 16 = CSV_IP, 18 = AG_XML, 19 =
MAN_XML,20= CID_SIA2_IP, 21= SIA2_IP, 22= CID_SIA2_UDP, 23=
SIA2_UDP, 31 = SMS_TEXT, 32 = SMS_MPTP
Miscellaneous: Enter 0 for this parameter
Event filter: 255 = all, 1 = status, 4 = emergency
No report
destinati
on
Keyword
setting
KEYWD
KEYWD:PROG,1111,IPOG
To set the keyword
15 characters max. for the keyword
PROG
Access Code
ACCES
ACCES:PROG,1111,1,1234
To set the Access Code (index number, code)
8 digits max. for the Access Code
1111 for
user 1
Guard time
settings
GUDT
GUDT:PROG,1111,10
To set the length of the guard time period
Guard time: 5 = 5 sec, 10 = 10 sec, 15 = 15 sec, 20 = 20 sec, 25 = 25 sec, 30
= 30 sec
10
Auto check-in
reports
TESTC
TESTC:PROG,1111,720,60
To configure the settings of auto check-in reports
Interval: 0 = disable, 240 = 4 hrs, 360 = 6 hrs, 480 = 8 hrs, 720 = 12 hrs, 1440
= 1 day, 2880 = 2 days, 4320 = 3 days, 5760 = 4 days, 7200 = 5 days, 8640 =
6 days, 10080 = 1 week, 21600 = 15 days , 43200 = 30 days
Offset time: 60 = 1 hr, 120 = 2 hrs, 240 = 4 hrs, 360 = 6 hrs, 480= 8 hrs, 720 =
12 hrs
720, 60