Climax Mobile Pro - Page 56

53
Item
Command
Example & Usage
Default
Callback time
CBTI
CBTI:PROG,1111,5,5,1
To set Callback time & Two-way time, and enable/disable callback check
access code
Parameter 1: Duration, 0 = disable, 1-30 = 1-30 min
Parameter 2: Two-way time, 1-30 = 1-30 min
Parameter 3: callback check access code, 0 = Disable, 1= Enable
-
Factory reset
FTSET
FTSET:PROG,1111
To execute a factory reset
-
Location
function
GEOTR
GEOTR:PROG,1111,1,1,5
To configure the location function
AGPS: 0 = disabled and 1 = enabled
CellLocate: Enter either 0 or 1 = enabled (Always ON no matter the
selection)
Tracking period: 0 = disabled, 6 = 6 minutes, 7 = 7 minutes, 8 = 8 minutes, 9
=9 minutes, 10 = 10 minutes, 15 = 15 minutes, 20 = 20 minutes, 30 = 30
minutes, 60 = 60 minutes
1,1,60
To set the CID
event code for
the red help
buttons
BTNEV
BTNEV:PROG,1111,100
To set the CID event code sent when Mobile Lite’s red help button is pressed.
100 = medical event
101 = personal emergency
120 = panic report
101
To enable/
disable voice
prompts
during guard
time and
confirmation
beeps
SNDCR
SNDCR:PROG,1111,1,1
To enable/disable voice prompts during guard time and confirmation beeps
1 = enable
0 = disable
1, 1
To reboot
Mobile Lite
RESET
RESET:PROG,1111
To restart Mobile Lite
--
To check
whether
Mobile Lite is
operational
ECHO
ECHO:PROG,1111
--
To obtain
Cellular signal
strength
CSQ
CSQ:PROG,1111
--
Incoming call
alert
ANSIN
ANSIN:PROG,1111,1,1
To enable/disable ringing sound for incoming call and enable/disable
incoming call check access code
Parameter 1: Ringing sound for incoming call, Disable = 0, Ring Enable = 1,
Ring Enable(Auto-Answer) =2
Parameter 2: Incoming call check access code, Disable = 0, Enable = 1
--
To enable /
disable silent
mode
SILENT
SILENT:PROG,1111,1
Enable/disable mobile silent mode
Disable = 0, Enable = 1
0
Set Caller ID
CALID
CALID:PROG,1111,1,0227942014
Parameter 1: Select Caller ID: 1 = ID #1, 2 = ID #2
Parameter 2: Caller ID number: Enter a number up to 15 digit long
--
Enable /
Disable Voice
Prompt
VOIEN
VOIEN:PROG,1111,1
Enable/disable mobile voice prompts
Disable = 0, Enable = 1
1