Climax Mobile Pro - Geo-Fence

25
- Mobile Lite Medical Help maps.google.com/maps?q=12.12312,121.123123
Last Know Loc. 1 Min Ago
(Display Mobile Lite exact location where help is sent through GPS
signal with the last time the location spotted).
PFIG SMS data format
The mobile Lite will send the PFIG SMS data format as the following:
(PFIG:id=1;trid=12345678;code=100;state=1,zone=000,lat=N43.489;lon=E6.6
531;)
Below is the list for the format and each of its meaning:
 id: the event sequence number
 trid: the account number
 code: CID event code (Please refer to the CID event code below 8.2
Contact ID Communications Protocol and Format for details)
 state: the CID qualifier (as CID format)
 partition: GG, area (as CID format)
 zone: CCC, zone or iser (as CID format)
 lat(latitude) & lon (longitude): GPS location
4.1.5. Geo-fence
The “Geo-fence” tab allows the user to setup a GeoFence area.
 When GeoFencing is enabled, Mobile Lite will check its location every 2
minutes.
 If the user leaves the GeoFence area and is detected while Mobile Lite is
checking its location, it will automatically report to the report destinations.
 If the user returns to the GeoFence area, it will also send restoration
report to the report destinations.