60
When AC is re-connected(restored)
302 – Mobile Lite Low on Battery (status)
When Mobile Lite is low on battery.
384 – RF Device Low on Battery (status)
When the learnt-in RF Fall Sensor, WTR or Panic Button is low on
battery.
602 – Auto Check-In Report (status)
When Mobile Lite makes an auto check-in report to the CMS.
643 – Cell Locate Inaccuracy (status)
When Cell Locate error margin is too great and the coordinate is
discarded..
644 – GPS/Cell Locate Time Out (status)
When Mobile Lite is unable to acquire any GPS/Cell Locate position
within reporting time limit.
645 – GPS/Cell Locate Position Follow Up After Alarm (emergency)
When an alarm is triggered, if GPS location could not be acquired
before the alarm report is made, Mobile Lite will report the alarm event
code first then follow up with event code 645.
646 – Location Positioning Command (status)
When Mobile Lite receives the SMS command “LOC” to report its
location, the report is sent with event code 646.
647 –GPS Location Tracking (status)
When Mobile Lite sends a periodic Location update according to
programmed interval of “Use Last GPS Location Setting”.
648 – Location Scream (status)
When a user requests Mobile Lite to scream.
671 – GeoFencing Action (status)
When Mobile Lite leaves the programmed GeoFence area.
To Previous Page
Loading...
