HCS User Manual
27
MOVING & STORAGE INSTRUCTIONS
NOTE:
Both the hardwired HCS and the plug-in HCS are
consult the Mounting Procedures section of the
Installation Instructions in this manual.
Always turn off input power to the EVSE at the circuit breaker
panel prior to hard-wiring an HCS to or disconnecting an HCS
from the service lines. Likewise, always turn off input power to the
EVSE at the circuit breaker panel prior to plugging an HCS into or
unplugging an HCS from a NEMA socket.
When transporting the EVSE, do not lift or carry the entire unit by
the charge cable. Likewise, do not lift or carry the entire unit by
from the plug-in HCS.
The EVSE has a non-operational storage temperature range of
-40°C to +80°C (-40°F to +176°F).
To Next Page
Loading...
