ClipperCreek HCS - Replacement Keys

HCS User Manual
31
Replacement Keys
Should replacement keys be required, contact the ClipperCreek
serial number
available for reference.
NOTE: If the Share2
®
option is desired to work in conjunction
with the ChargeGuard
®
option, these two options
must be ordered and built at the same time (Share2
®
and ChargeGuard
®
are factory-installed options and
cannot be installed in the eld). The optional Share2
®
feature allows two EVSE to share power supplied by one
circuit breaker. Please refer to the Share2
®
Enabled HCS
section of this User Manual for further instructions.
Figure 13: ChargeGuard
®
(OFF or Restricted Access Position:
The EVSE will be enabled for as long as the vehicle remains
plugged in. The EVSE will reset when the vehicle connector is
unplugged.)