EasyManuals Logo

CME BodyGuard 323 Service Manual

CME BodyGuard 323
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
of 5048
Service Center Recommended Parts
Service center recommended parts may be ordered from CME Distributor
Recommended BodyGuard Parts List according to specific pump model.
Cleaning and Storage
Cleaning
Before connecting the pump to a patient, and periodically during use, clean the unit
using a lint-free cloth lightly dampened with warm water and a 1:10 (10%)
solution of bleach (bleach based disinfectant).
Warning: Always turn the pump off and remove the battery before
cleaning.
Warning: Always unplug the charger from AC power before cleaning.
Caution: Do not clean the pump or charger with chemicals such as
Xylene, Acetone or similar solvents. These chemicals can cause damage
to plastic components. Use a lint-free cloth dampened with warm water
and a mild detergent or disinfectant.
Caution: Do not soak or immerse any part of the pump or charger in
water
Storage
If the pump is to be stored for an extended period it should be cleaned and the
battery fully charged. Store in a clean, dry atmosphere at room temperature and, if
available, utilize the original packaging for protection.
Perform functional tests and ensure that battery is fully charged once every three
months.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CME BodyGuard 323 and is the answer not in the manual?

CME BodyGuard 323 Specifications

General IconGeneral
BrandCME
ModelBodyGuard 323
CategoryMedical Equipment
LanguageEnglish

Related product manuals