EasyManua.ls Logo

CNC-Step T-Rex Series - General Work-Related Dangers

CNC-Step T-Rex Series
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Instructions
T-Rex-Series
CNC-STEP e.K. Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 15
Support: +49 (0)2831/91021-50
31.03.2014
ATTENTION:
Health risks due to contact with cooling emulsion!
Contact with cooling emulsion may lead to health risks.
Avoid contact with your skin.
Remove cooling emulsion from the skin immediately.
Do not inhale the vapours.
Oil and fat
ATTENTION:
Risk of health due contacting with oil and fat!
Contact with oil and fat may lead to health risks.
Avoid skin contact.
Remove oil and fat immediately from skin.
Do not inhale vapours.
2.2.7 Gene r al w o rk- relate d dang e r s
Noise
ATTENTION:
Risk of injury by noise!
The noise levels occurring in the operating area may cause severe hearing damage.
Always wear hearing protection when working.
Only stay in the danger area when required.
Dirt and objects lying around
Attention:
Risk of tripping by dirt and objects lying around!
Soiling and objects left lying around are sources of slipping and stumbling and can
cause considerable injuries.
Always keep the work area clean.
Remove any objects which are no longer required from the working area,
especially those near ground.
Designate tripping positions with yellow-black marker band.

Table of Contents

Other manuals for CNC-Step T-Rex Series

Related product manuals