CNC-Step T-Rex Series - Operation; Safety Guidelines for Operation

Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 51
Support: +49 (0)2831/91021-50
31.03.2014
7 Operatio n
7.1 Safety guidelines for operation
Improper operation
WARNING:
Risk of injury by improper operation!
Improper operation can result in serious injuries and significant property damage.
• Perform all operations in accordance with the information and instructions of
this manual. Note the following before beginning work:
➢ Make sure that all covers and safety devices are installed and
working properly.
➢ Ensure that there are no persons in the danger zone.
• Never bridge or disable safety devices during operation.
7.2 Operations before usage
1
Make sure that all covers are installed on the machine.
2
Ensure the tightness of all connections.
3
Make sure that none of the emergency stop switch is pressed.
4
Check the ambient temperature.
HINT:
The individual materials have different coefficients of expansion. At an ambient
temperature of 20-25 ° C it is ensured that no significant impacts occur during
processing. Therefore, it is recommended to maintain an ambient temperature of 20-
25 ° C when operating the machine.