CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
HINT:
Property damage due to improper transport!
Improper transportation can cause considerable material damage.
• When unloading delivered packages and when transporting on the
premises, proceed with caution and adhere to the symbols and instructions
on the packaging.
• When slinging the load all attachment points provided by the manufacturer
have to be used in accordance with the specifications.
• Do not remove packing until just before the installation.
5.2 Transport inspections
Check the delivery immediately on receipt for completeness and transport damage.
Proceed in case of visible damage as follows:
• Do not accept the delivery or only under reserve.
• Record the scope of the damage on the transport documents of the carrier, or on the delivery
note.
• Lodge complaint.
HINT:
Lodge a complaint for each defect, as soon as it is recognised. The claims for damage
must be filed in the lawful reclaim periods.
5.3 Packaging
Regarding packaging
The individual packages are packed according to the expected transport conditions.
Environmentally friendly material is used exclusively for the packaging.
The packing has the function of protecting the individual components against damage, corrosion,
etc., until they are finally assembled. Therefore, do not damage the packaging and only remove
immediately before installation.
What to do with packing materials
Dispose of packaging material in accordance with the respective valid laws and local regulations.
To Next Page
Loading...
