CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Support: +49 (0)2831/91021-50
4.2 Short description for the area of application
Usage of the machine
The machine is used in conjunction with a tool for:
• Milling
• Engraving
• Cutting
• Drilling
• Laser Engraving
• Grinding
• Dosing
• Measuring
• Positioning
Short Description
The machine cannot function alone. The following additional components (accessories) are
necessary for operation:
• Control which consists of a PC with the right configuration with struck up control software
(e.g. WinPCNC, Mach3, USBCNC) and a stepper motor control (e.g. Zero3).
• Tool with 43mm intake for direct clamping into the holder provided.
• Accessories, see Appendix
Control via operating software
To control it requires a CNC-CAM-software.
In a design-/graphic-program (e.g. ConstruCAM 3D, Corel Draw, AutoCad, etc.) the drawings or
texts are created and stored in a suitable format. This data can be (e.g. WIN PC-NC) read by the
control software.
Via control the stepper motors for the axis-movement are controlled. By stepping motors and the
driven ball screws, a conversion of rotary motion into linear is carried out.
To Next Page
Loading...
