CNC-Step T-Rex Series - Activities During Operation; Operating Machine

Operating Instructions
T-Rex-Series
CNC-STEP e.K. ▪ Siemensstrasse 13-15 ▪ 47608 Geldern ▪ Germany
Page 53
Support: +49 (0)2831/91021-50
31.03.2014
7.4 Activities during operation
7.4.1 Opera t i ng ma c h i ne
Personnel:
• Operator
Safety equipment:
• protective clothing
• Safety shoes
• Goggles
• protective gloves
• Hearing protection
• Protective cover
Rotary tools
WARNING:
Risk of injury from rotating tools!
In spindles clamped tools may result in serious personal injury or property damage.
• Before starting work, ensure that all covers and safety devices are installed
and working properly.
• • Do not reach into moving tool during operation.
• • Before replacing the tools always pull power plug of the milling motor or
turn off the machine and secure against reconnection.
Axis movements
WARNING:
Risk of injury due to axis movements!
Collision of people with components of the machine (Y-bridge, mobile unit, rotary
table with the work piece, tool) can lead to serious injuries.
• Keep anybody parts away from in-between the moving parts and end stops
of the axes.
• Do not grab in gaps between adjacent components of linear guides and
access adjacent components
• Perform work on the linear guides only at standstill.
• In the work area wear personal protective equipment.