WARNING:
Risk of health damage by contact with cooling emulsion!
Contact with cooling emulsion can lead to health damage.
• Avoid skin contact.
• Remove the cooling emulsion immediately from the skin.
• Do not inhale vapours.
DANGER:
Danger to life due to electric current!
Contact with live components can be fatal. Activated electrical components can run
uncontrolled movements and cause serious injury.
• Switch off the electrical supply before starting work and secure against
reconnection.
WARNING:
Risk of injury by improperly performed maintenance!
Improper maintenance can lead to severe injuries and substantial property damage.
• Before starting any work, ensure installation freedom.
• Maintain order and cleanliness at the installation site! Loosely stacked or
scattered components and tools are accident sources.
• If components have been removed, ensure correct assembly, reinstall all
fasteners and note correct screw tightening torques.
• Note following before re-starting :
➢ Ensure that all maintenance work has been done in accordance with the
information and instructions were carried out and completed in this guide.
➢ Ensure that there are no persons in the danger zone.
• Make sure that all covers and safety devices are installed and working
properly.
To Next Page
Loading...
