coaxLAN CL64WLAN - Wireless

CL64WLAN User Manual V001
23 of 44
Item
Description
DHCP enable
The DHCP function will be enabled if the enable
option is selected in this combo box.
Lease time
It is the period of time during which the DHCP server
allows the assigned IP addresses to be used by the
clients. By setting a suitable lease time, you would
enable the DHCP to take better advantage of the IP
addresses which are not used again.
IP address start
It is the IP pool starting address used by the DHCP
server. The IP addresses assigned by the DHCP server
will start from this IP address.
IP address end
It is the IP pool ending address used by the DHCP
server. The IP addresses assigned by the DHCP server
will end in this IP address.
DNSn
They are the IP addresses of the DNS servers used.
DNS1 is the primary DNS server and DNS2 is the
secondary DNS server address. DNS
servers are used
to look up site addresses based on their names.
Table 6
7. Wireless
The Wireless screen includes the following sub-menus:
• Wireless Statu
s
• Bas
ic Setting
• MAC filter
Wireless status is the same sub-menu as in Running → Wireless Status as it is shown in Picture.