Chapter 4: To use the web interface
98-140012-H Advanced settings 109
3. If you want users to enter a password to be able to use AT commands on the LAN/WLAN
interface, select Require password. This means that users must enter a password using
the _ICLCK command before they can send AT commands on the LAN/WLAN interface.
By default, no password is required in order to send AT commands on the LAN/WLAN
interface.
4. Click Save.
HTTPS settings
The EXPLORER 710 internal web server supports HTTPS, which includes encryption of the
exchanged web traffic when accessing the EXPLORER 710 web interface.
By default, the system uses a self-signed certificate, but it also allows you to upload your own
certificate signed by a trusted Certificate Authority.
Do as follows:
1. Under Advanced > Security, locate the field HTTPS.
2. Select Redirect HTTP to HTTPS if you want the EXPLORER 710 to automatically
redirect your HTTP traffic to HTTPS.
3. Select Use uploaded TLS/SSL certificate and click Upload certificate if you want to
upload your own generated SSL certificate for the system to use. Please note that the
uploaded certificate file (.pem file format) must include the RSA private key used to
generate the certificate:
-----BEGIN CERTIFICATE-----
…
… <your certificate here> …
…
-----END CERTIFICATE-----
-----BEGIN RSA PRIVATE KEY-----
…
… <your key here> …
…
-----END RSA PRIVATE KEY-----
4. Click Save.
Before you select this option, make sure you know the administrator
password of the EXPLORER 710! The default password is admin.
If you redirect traffic to HTTPS, you cannot connect to the EXPLORER 710 with the
EXPLORER Connect app.
To Next Page
Loading...
