COBHAM Explorer 710 - Page 161

Appendix B: Command reference
98-140012-H AT commands 152
<ftp dir> <ftp dir> The name of the directory on the ftp server to use for getting or saving a file.
<ftp passwd> <ftp passwd> Password for the ftp server.
<ftp server> <ftp server> Host name or IP address of the ftp server.
<ftp uname> <ftp uname> User name for the ftp server.
<ip_addr_hi> <ip_addr_hi> The upper IP address of a range of allowed IP addresses. This parameter is
optional; if omitted, only the specified single IP address <ip_addr_lo> may
access the EXPLORER 710.
<ip_addr_lo> <ip_addr_lo> IP address of the HTTP client that should be allowed remote access to the
EXPLORER 710,
or, the lowest address in a range of IP addresses, if a range of addresses is
allowed.
<local dir> <local dir> The name of the local directory in the EXPLORER 710 to use for getting or
saving a file.
<mode> 0
1
Deferred activation.
Immediate activation.
<new passwd> <new passwd> The new password to be used after this command. The password must be 5
to 15 characters long and cannot contain spaces.
Avoid special characters. Accepted characters: A through Z (uppercase
characters), a through z (lowercase characters) and 0 through 9 (numeric
characters).
<old passwd> <old passwd> The old password that is already in the system.
<type> AD
RS
The type of password is administrator password.
The type of password is remote SMS password.
Parameter Values Meaning