COBHAM Explorer 710 - Page 160

Appendix B: Command reference
98-140012-H AT commands 151
M2M related AT commands
The following tables summarize some of the most used AT commands for M2M operation.
Parameters are explained in Parameters for ATCO commands on page 151 and Parameters
for other M2M related AT commands on page 155.
ATCO commands
The table below summarizes the ATCO commands, i.e. AT commands that can be used in the
SMS command ATCO.
Parameters for ATCO commands
Note
The EXPLORER 710 does not support BGAN M2M SIM cards nor over-the-air software
upgrade from the Inmarsat FUP server.
Note
You can only use SMS commands over the BGAN network, not with a cellular
connection.
Command Parameters
_IATCROBST
a
a. Robustness for 3GPP LTE signals, not ATC
<enable>
_ICPWD
<type>,<old passwd>,<new passwd>
_IGETFILE
<ftp dir>,<filename>,<local dir>,<ftp server>,<ftp uname>,<ftp passwd>[,<apn>[,<apn
uname>[,<apn passwd>]]]
_IGETFW
<mode>[,<ftp server>[,<ftp uname>[,<ftp passwd>[,<apn>[,<apn uname>[,<apn passwd>]]]]]]
_IREMWEB
<enable>,<ip_addr_lo>[,<ip_addr_hi>][,<apn>[,<apn uname>,<apn passwd>]]
_ISENDFILE
<local dir>,<filename>,<ftp dir>,<ftp server>,<ftp uname>,<ftp passwd>[,<apn>[,<apn
uname>[,<apn passwd>]]]
_IUPDCFG
<filename>
_IUPDFW
<filename>
Parameter Values Meaning
<apn passwd> <apn passwd>Password for the APN.
<apn uname> <apn uname> User name for the APN.
<apn> <apn> APN name.
<enable> 0
1
Disable.
Enable.
<filename> <filename> The name of the file to use, including extension.