Appendix B: Command reference
98-140012-H AT commands 156
AT commands for message (SMS) configuration
The following AT commands are used for configuration of SMS.
For details on parameters for the message configuration commands, see the 3GPP
standard ETSI TS 127 005 V4.2.1.
Command Parameters Function
+CMGD <index> Delete Message.
+CMGF <mode> Message Format.
+CMGL <stat> List Messages.
+CMGR <index> Read Messages.
+CMGS <da/mr>[,<toda/scts>] Send Message.
+CNMI [<mode>[,<mt>[,<bm>[,<ds>]]]] New Message Indications to TE.
+CPMS <mem1>[,<mem2>[,<mem3>]] Preferred Message Storage.
+CSCA <sca>[,<tosca>] Service Center Address.
+CSMP
[<fo>[,<vp>[,<pid>[
,<dcs>]]]]
Set Text Mode Parameters.
+CSMS <service> Select Message Service.
To Next Page
Loading...
