Chapter 4: To use the web interface
98-140012-H Terminal settings 78
To enable or disable the pointing sound
The EXPLORER 710 can make a sound to guide you through the pointing procedure (default
enabled). To enable or disable the pointing sound, do as follows:
1. In the Terminal settings page, locate the Audio indication section.
2. Select Audio assisted pointing if you want to use a pointing sound to assist your
pointing process.
3. At Audio assisted pointing volume (0 - 100) type the volume level you want for the
pointing sound.
4. Click Save.
To select the type of navigation system (GNSS)
To select which navigation system to use with your EXPLORER 710, do as follows:
1. In the Terminal settings page, locate the GNSS section (Global Navigation Satellite
System).
2. Select GPS or GLONASS.
3. Click Save.
To select the language
The default language of the web interface is English. You can change the language to French,
German, Russian, Spanish, Chinese, Japanese or Portuguese.
To change the language, do as follows:
1. In the Terminal settings page, locate the Language section.
2. Select a language from the list and click Save.
It may take some minutes for the EXPLORER 710 to change the navigation system.
To Next Page
Loading...
