98-175666-D Appendix F: Event messages F-7
List of events
08541-0 ADM WARNING BUC voltage low The voltage for the BUC is too low,
probably caused by a malfunctioning VIM
or BUC.
08542-0 ADM WARNING BUC voltage
high
The voltage for the BUC is too high
probably caused by a malfunctioning VIM.
08543-0 ADM WARNING LNB voltage low The voltage for the LNB is too low
probably caused by a malfunctioning VIM
or LNB.
08544-0 ADM WARNING LNB voltage
high
The voltage for the LNB is too high
probably caused by a malfunctioning VIM.
08546-0 ADM WARNING Antenna
temperature
The temperature of the antenna is too
high. Check if the fan is working.
0854A-0 ADM INFO Xel encoder slip A slip of the cross-elevation encoder has
been detected. If this event is not
resolved by itself after some time, check
the belt and encoder of the cross-
elevation axis.
0854D-0 ADM WARNING GNSS position No position available from the GNSS
device or position too old.
0854E-0 ADM INFO GNSS velocity No velocity available from the GNSS
device.
0854F-0 ADM WARNING Heading data Heading information is missing in the
antenna.
0855E-0 ADM WARNING Low elevation The antenna is not allowed to transmit
because the elevation is too low.
0855F-0 ADM WARNING Heading range Heading data range error. External
heading unit supplies unreliable data.
08562-0 ADM WARNING High elevation The antenna cannot perform acquisition
in gyro-free mode because the elevation
is too high.
08564-0 ADM ERROR Xel/ele axis
cables switched
Check cable connections for xel and ele.
08841-0 ADM ERROR Tuner lock The internal tuner PLL was unable to lock.
08842-0 ADM WARNING GSC
demodulator
The GSC demodulator has reported an
error.
08843-0 ADM WARNING DVBS
demodulator
The DVBS demodulator cannot be
initialised and loaded correctly.
ID Module Type Description Explanation
Table F-1: Event messages (Continued)
To Next Page
Loading...
Need help?
General
