EasyManua.ls Logo

Code Blue IP5000 - Network Configuration; Connecting to the IP5000 for the first time

Code Blue IP5000
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-147-Bpage 10 of 47
IP5000 1.0 Series
Administrator Guide
4 Configuring the Network Settings
TheIP5000speakerphonecomesequippedwithonePoELANportandtwonon-PoELANports.
TheIP5000speakerphonecanbeconguredforDHCPorStaticIPaddressing.Theadditional
10/100EthernetLANportscanbeutilizedforconnectivityofauxiliaryIP-baseddevicessuchasIP
cameras,cardaccessreaders,etc.
4.1 Connecting to the IP5000 for the first time
TheIP5000speakerphonewillbeconguredviaDHCPbydefault.
TheIP5000speakerphonemayalsobeconguredviaTFTPserverwhichcanbesetupinyour
DHCPconguration.
1. ConnecttheIP5000speakerphonetoyournetworkandconnectpower.ThegreenCall
Placed LED and red Call ReceivedLEDwillashmomentarilyandanaudiblebeepwillbe
heardoutofthespeakerwhentheunitisreadyforuse.
TheIP5000speakerphonewillacquireIPNetworksettingsfromyourDHCPserver.
2. CheckyourDHCPleaserecordsorutilizeanetworkscannersuchasSoftPerfectNetwork
ScannertomatchtheMACaddressoftheIP5000speakerphonetothecorrectIPaddress
inyourleasetableoroutputofthenetworkscanner.
3. OnceyouhaveobtainedtheIPaddress,youcanconnecttotheIP5000speakerphonevia
https://IP5000_IP_Address.
4. The default usernameis“admin”andthedefaultpasswordis“admin”.