Code Blue IP5000 - Place Call Scripting

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-147-Bpage 37 of 47
IP5000 1.0 Series
Administrator Guide
Place Call Scripting
TheIP5000speakerphonecallcapabilitiesareprogrammedby:
1. Selecting Place Call in the Add Actiondropdownmenu.
The following are parameters that can be chosen:
Parameter Description
Programaphonenumbertheunitshould
dial.
Instruct the phone to dial another phone
numberiftheinitialcallisnotanswered
withintimeperiodspeciedintheDialing/
Answertimeouteld.
TheamountoftimetheIP5000willringa
phonenumberbeforeexecutingthe
condition set.
ThemaximumtimetheIP5000willstayin
acall.Afterthistimetheunitwillhangup
and return to the idle condition.
Select option the IP5000 will take while
dialingaphonenumber.
The action the IP5000 will take when a
call is answered.
ThisparameterenablesordisablesIn-Call
Commandsduringacall.
NOTE:EnsureyourbuttonordiagnosticscriptdoesnothavesamerecordingplayedtotheCaller
andCalleeatthesametime.