Code Blue IP5000 - In-Call Commands

Code Blue
•
259 Hedcor Street
•
Holland, MI 49423 USA
•
800.205.7186
•
www.codeblue.com
GU-147-Bpage 43 of 47
IP5000 1.0 Series
Administrator Guide
8.1 In-Call Commands
TheIP5000speakerphoneprovidesenhancedfunctionalitythroughtheutilizationofIn-CallCom-
mands.ThesecommandsareDTMForphonekeypadentriesmadebytheCallee.Belowisalist
andexplanationofeachcommand.
In-Call Command Function Description
1 PlayLocationMessage PlaystheLocationRecordingselectedin
General Settings
2 SwitchfromSpeakertoPAS
OutputandMutetheMic
Transfers the audio to the PAS audio output
andmutesthemicrophonetoeliminatea
feedbackloop
3 DeactivateCallTimer DeactivatestheMaximumcalldurationtimer
settingintheoperationalscriptcurrently
running
4 Activate/DeactivateAuxiliary1 ToggleAuxiliary1state;activateor
deactivate
5 Activate/DeactivateAuxiliary2 ToggleAuxiliary2state;activateor
deactivate
6 MicVolumeUp Increasethemicrophonevolume;usedto
decreasetheCalledPartyvolume
7 MicVolumeDown Decreasethemicrophonevolume;usedto
decreasetheCalledPartyvolume
8 SpeakerVolumeUp Increasethespeakervolume;usedto
increasetheCallingPartyvolume
9 SpeakerVolumeDown Decreasethespeakervolume;usedto
decreasetheCallingPartyvolume