COMAC Abila 45B - Ec Declaration of Conformity

To Next Page

To Previous Page

EC DECLARATION OF CONFORMITY

The undersigned company:

COMAC S.p.A.

Via Maestri del Lavoro n.13

37059 Santa Maria di Zevio (VR)

declares under its sole responsibility that the

FLOOR SCRUBBER-DRYER

mod. ABILA45 E 230V – ABILA50 E 230V – ABILA50 E 110V

complies with the requirements of the following Directives:

 2004/108/EC: Electromagnetic Compatibility Directive and subsequent modifications.

 2006/95/EC: Low Voltage Directive.

 2006/42/EC: Machinery Directive.

They also comply with the following standards:

 EN 60335-1: Household and similar electrical appliances - Safety. Part 1: Generic standards.

 EN 60335-2-72: Household and similar electrical appliances. Part 2: Generic standards for automatic machines for floor treatment for commercial and

industrial use.

 EN 12100-1: Safety of Machinery - Basic concepts, general principles for design - Part 1: Basic terminology and methodology.

 EN 12100-2: Safety of Machinery - Basic concepts, general principles for design - Part 2: Technical principles.

 EN 55014-1: Electromagnetic compatibility - Regulations for household appliances, electrical devices and similar equipment. Part 1: Emission -

Regulation for product family.

 EN 55014-2: Electromagnetic compatibility - Regulations for household appliances, electrical devices and similar equipment. Part 2: Immunity -

Regulation for product family.

 EN 55022: Devices for information technology – Radio interference characteristics – Limits and measurement methods.

 EN 61000-6-2: Electromagnetic compatibility (EMC) - Part 6-2: Generic standards – Immunity for industrial environments.

 EN 61000-6-3: Electromagnetic compatibility (EMC) - Part 6-3: Generic standards — Standard emission for residential, commercial and light-industrial

environments.

 EN 61000-3-2: Electromagnetic compatibility (EMC) - Part 3-2: Limits – Limits for harmonic current emissions (Equipment with input current  16 A per

phase).

 EN 61000-3-3: Electromagnetic compatibility (EMC) - Part 3-3: Limits – Restriction of voltage variations and flicker in low voltage power supply systems

for devices with a rated current  16 A.

The person authorised to compile the technical file:

Sig. Giancarlo Ruffo

Via Maestri del Lavoro, 13

37059 Santa Maria di Zevio (VR) - ITALY

Santa Maria di Zevio (VR), 27-06-2011

COMAC S.p.A.

Legal representative

Giancarlo Ruffo

COMAC spa

Via Maestri del Lavoro, 13 – 37059 Santa Maria di Zevio – Verona – ITALY

Tel. +39 045 8774222 – Fax +39 045 8750303 – E-mail: com@comac.it