ComAp ECON-4

ECON-4, SW version 1.4 rev.1, ©ComAp – March 2016 Draft 39
ECON-4 Reference guide.pdf
Speed request [BIN / ANA / DATA]
The setpoint defines source of the Speed reference of the engine.
Table 6
Speed Request
value
Speed reference source
BIN SPEED UP, SPEED DOWN
ANA SPEED REQUEST
DATA CAN bus
Hint:
The setpoint Speed request defines also source of binary inputs, see Table 5.
Speed request = BIN
Speed request = ANA Speed request = DATA