ECON-4 1.4.0 Global Guide
3
5.3.2 Data Binary outputs 29
5.3.3 Data Analog inputs 29
5.3.4 Data Analog outputs 29
5.3.5 ECON adjustement for various types of actuators 29
5.4 ECON-4 configuration and PC tools 32
5.4.1 Setpoints adjustements in WinScope SW: 32
5.4.2 Econ-4 firmware update 33
5.5 ECON adjustement for various types of actuators 34
5.5.1 Adjustment for LINEAR actuator type (typically Woodward 34
5.5.2 Adjustment for LINEAR NO FDB actuator type (typically GAC, Woodward) 35
5.5.3 Adjustment for BRIDGE actuator type (typically Heinzmann) 35
5.6 Detailed fucntion 37
5.6.1 Block schematics - speed governor 37
6 Communication 40
6.1 Connection to ECON-4 40
7 Technical data 41
8 Appendix 43
8.1 Setpoints 44
8.1.1 List of setpoint groups 44
8.1.2 List of setpoints 45
8.1.3 Group: Engine StartGroup: ECON4-EngRPM 46
8.1.4 Group: Engine StartGroup: ECON4-EngStart 51
8.1.5 Group: Main PIDGroup: ECON-4-MainPID 53
8.1.6 Act type 1 – predefined for Woodward ITB 0-200 mA 69
8.1.7 Act type 2 – predefined for Woodward ITB PWM 71
8.1.8 Act type 3 –predefined for Woodward F-series PWM 71
8.1.9 Act type 4 – predefined for Heinzmann STG 10 72
8.1.10 Group: Analog sensors 72
8.1.11 List of tested actuators by ComAp 74
To Next Page
Loading...
Need help?
General
