ComAp ECON-4

ECON-4 1.4.0 Global Guide
42
Power supply range
12-36 V DC
Consumption
0,5 – 10 A, depends on supply voltage and used actuator
Power supply
Maximal distance
10 m
Speed
19 200 bps
RS232 interface
Type of sensor
Active or magnetic pick-up (connection by shielded cable is strongly recommended)
Minimum input voltage
2 Vpk-pk (from 4 Hz to 4 kHz)
Maximum input voltage
50 Veff
Minimum measured
frequency
4 Hz
Maximum measured
frequency
10 kHz (min. input voltage 6Vpk-pk)
Frequency measurement
tolerance
0,2 %
Speed pick-up inputs
6 back to Table of contents